www.sunled.com part number: ZFAUR10A2 surface mount display mar 17,2011 sdsa5417 v3 layout: maggie l. p. 1/4 absolute maximum ratings (t a =25c) ur (gaasp/gap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 160 ma power dissipation p d 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 package schematics notes: 1. all dimensions are in millimeters (inches), tolerance is 0.25(0.01")unless otherwise noted. 2. specifications are subjec t to change without notice. 3.the gap between the reflector an d pcb shall not exceed 0.25mm. ur (gaasp/gap) unit forward voltage (typ.) (i f =10ma) v f 1.9 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 627 nm wavelength of dominant emission (typ.) (i f =10ma) d 625 nm spectral line full width at half-maximum (typ.) (i f =10ma) 45 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 pf operating characteristics (t a =25c) part number emitting color emitting material wavelength nm p description min. typ. ZFAUR10A2 red gaasp/gap 1400 3990 627 common anode, rt.hand decimal. luminous intensity (i f =10ma) ucd ur features 0.4 inch digit height robust package low power consumption standard configuration: gray face w/ white segments package:250pcs/ reel moisture sensitivity level: level 2a rohs compliant
www.sunled.com part number: ZFAUR10A2 surface mount display mar 17,2011 sdsa5417 v3 layout: maggie l. p. 2/4 ? ur led is recommended for reflow soldering and soldering profile is shown below.
www.sunled.com part number: ZFAUR10A2 surface mount display mar 17,2011 sdsa5417 v3 layout: maggie l. p. 3/4 ? recommended soldering pattern (units : mm; tolerance: 0.15) ? tape specification (units : mm) ? reel dimension remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the sort ing process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com part number: ZFAUR10A2 surface mount display mar 17,2011 sdsa5417 v3 layout: maggie l. p. 4/4 packing & label specifications
|